Acer 8930G laptop won't load a good working hard drive at first would turn off before loading up windows, and then just sticks. Could it...
Acer 8930G laptop won't load a good working hard drive at first would turn off before loading up windows, and then just sticks. Could it be a bad capacitor? and could this affect the inverter, as i bought a new inverter it lasted 5 mins while i was investigating the other problem, all other hardware works, tested graphics card etc.
Answer for this question : Usually, these problems caused by the bad nec tocin capacitor that installed at the VCore lane of the motherboard.
Nec tocin is a capacitor that working together with processor, this working hard during the laptop booting on startup, so if this get the trouble will causing the laptop fail finishing the booting process.
To replace this capacitor type, get out it and replace with 4 x 330 capacitors SMD.
The image above is a nectocin capacitor after get out from the motherboard. This always broken after get out using the solder.
Answer for this question : Usually, these problems caused by the bad nec tocin capacitor that installed at the VCore lane of the motherboard.
Nec tocin is a capacitor that working together with processor, this working hard during the laptop booting on startup, so if this get the trouble will causing the laptop fail finishing the booting process.
To replace this capacitor type, get out it and replace with 4 x 330 capacitors SMD.
