To solve the problem of LCD laptop that blurry you can use the following tips. First, i calibrate trimpot back of LCD ( open the LCD casing ...
To solve the problem of LCD laptop that blurry you can use the following tips.
First, i calibrate trimpot back of LCD ( open the LCD casing first ) but this action not success, LCD screen normal just for a minute and blurry again after that. And then i do the following steps.
1. Open the LCD casing
2. Look for trimpot / potensio meter / variable resistor back of LCD
3. Calibrate by turn it until almost normal ( calibrate and watch to LCD screen, the scree must be changed when you turn the trimpot )
4. Preparing new trimpot / variable resistor
5. The trimpot consist of 3 legs /pins. Choose the third leg and connect to ground via new trimpot a like the following sequence. Use small cable to connect it.
third leg of timpot installed --------- new trimpot ---------- ground.
6. Calibrate again the new trimpot have installed until the screen normal ( not blurry ), and success!!!.
Position of new trimpot can be placed a like the following picture.
Pict. 1. Posotion of New trimpot
I hope this post will help you. I have done this steps and success, please write on comment area if you still fail.
First, i calibrate trimpot back of LCD ( open the LCD casing first ) but this action not success, LCD screen normal just for a minute and blurry again after that. And then i do the following steps.
1. Open the LCD casing
2. Look for trimpot / potensio meter / variable resistor back of LCD
3. Calibrate by turn it until almost normal ( calibrate and watch to LCD screen, the scree must be changed when you turn the trimpot )
4. Preparing new trimpot / variable resistor
5. The trimpot consist of 3 legs /pins. Choose the third leg and connect to ground via new trimpot a like the following sequence. Use small cable to connect it.
third leg of timpot installed --------- new trimpot ---------- ground.
6. Calibrate again the new trimpot have installed until the screen normal ( not blurry ), and success!!!.
Position of new trimpot can be placed a like the following picture.
Pict. 1. Posotion of New trimpot
I hope this post will help you. I have done this steps and success, please write on comment area if you still fail.
